How do I setup the WEP/ WPA-PSK for my F1000 - Powered By Kayako SupportSuite

21 Nov 2009

Support Center » Knowledgebase » How do I setup the WEP/ WPA-PSK for my F1000

	How do I setup the WEP/ WPA-PSK for my F1000

Solution

To set up the WEP/ WPA-PSK for my F1000 follow these instructions

1. Press [Menu]
2. Scroll down to WiFi Settings, Press [OK]
3. Select Net Search, Press [OK]
4. Select the WiFi network that you wish to use from the list.

Note: If a Padlock is shown then a WEP key or WPA-PSK is required

1. Press [Save]
2. Select an SSID to save in and Press [Save] again
3. Select Security Mode, Press [OK]
4. Select WEP Key Info or WPA-PSK depending on the security (the phone should select the correct one by default), Press [OK]

If you have selected WEP

1. Select Auth. Method, Press [OK]
2. Select Open Key, Press [OK]
3. The bar will select 64bit or 128 bit WEP for you, just Press [OK]
4. Enter the WEP Key, Press [OK]
5. Select WEP Key Index, Press [OK]
6. Accept default value, usually 1 by pressing [OK] (Stop here if Orange broadband user)
7. Select Activate and Press [OK]

If you have selected WPA-PSK

1. Enter the PSK Key, Press [OK] (Stop here if Orange broadband user)
2. Select Activate and Press [OK]

Your Mobiboo F1000 should now connect and register and you should hear a â€˜beepâ€™ and the screen should display a picture.

NOTE - Pressing the * key on the F1000 keypad toggles between numbers and letters

SPECIAL INFORMATION FOR ORANGE BROADBAND (FORMERLY WANADOO) USERS

If you are an Orange broadband user and have a live box, then you need to perform a couple of extra steps;

1. Follow all the instructions above as far as â€œStop hereâ€ shown in red above
2. Before selecting Activate and pressing [OK] on your Mobiboo F1000, you will need to press & hold the â€˜1â€™ button on the back of the live box until the pairing light (antenna symbol, top of box) flashes.
3. Once flashing, select Activate and Press [OK] on the handset

Your Mobiboo F1000 phone should now connect and register and display â€˜Mobibooâ€™ on the screen with the name of the WiFi network you are connected via beneath.
The next time you come into range of the live box, your Mobiboo F1000 will register automatically. However, if at any time you RESET or REBOOT your live box, you will need to repeat this procedure.

Article Details

Article ID:

Created On:

14 Mar 2007 12:28 PM